歡迎蒞臨南京沃博生物科技有限公司官方網站!

H3K27ac polyclonal antibody

貨號 C15410196-10/ C15410196-50 售價 咨詢
規格 10ug/50ug CAS號
  • 產品簡介
  • 相關產品

Polyclonal antibody raised in rabbit against the region of histone H3 containing the acetylated lysine 27 (H3K27ac), using a KLH-conjugated synthetic peptide.

Lot A1723-0041D
Concentration 2.8 μg/μl
Species reactivity Human, mouse, rat, Arabidopsis, wide range expected
Type Polyclonal,ChIP grade, ChIP-seq grade
Purity Affinity purified
Host Rabbit
Storage Conditions Store at -20°C; for long storage, store at -80°C. Avoid multiple freeze-thaw cycles.
Storage Buffer PBS containing 0.05% azide and 0.05% ProClin 300.
Precautions This product is for research use only. Not for use in diagnostic or therapeutic procedures.
Applications Suggested dilution References
ChIP/ChIP-seq * 1 μg/IP Fig 1, 2
CUT&TAG 1 μg Fig 3
ELISA 1:500 Fig 4
Dot Blotting 1:20,000 Fig 5
Western Blotting 1:1,000 Fig 6
Immunofluorescence 1:500 Fig 7

* Please note that the optimal antibody amount per IP should be determined by the end-user. We recommend testing 0.5-5 μg per IP.

  • Validation Data
    A.
    B.

    Figure 1. ChIP results obtained with the Diagenode antibody directed against H3K27ac

    Figure 1A ChIP assays were performed using human HeLa cells, the Diagenode antibody against H3K27ac (Cat. No. C15410196) and optimized PCR primer pairs for qPCR. ChIP was performed with the “Auto Histone ChIP-seq” kit on the IP-Star automated system, using sheared chromatin from 1,000,000 cells. A titration consisting of 1, 2, 5 and 10 μg of antibody per ChIP experiment was analyzed. IgG (2 μg/IP) was used as a negative IP control. Quantitative PCR was performed with primers for the promoters of the active EIF4A2 and ACTB genes, used as positive controls, and for the inactive TSH2B and MYT1 genes, used as negative controls.

    Figure 1B ChIP assays were performed using human K562 cells, the Diagenode antibody against H3K27ac (Cat. No. C15410196)and optimized PCR primer pairs for qPCR. ChIP was performed with the “iDeal ChIP-seq” kit (Cat. No. C01010051), using sheared chromatin from 100,000 cells. A titration consisting of 0.2, 0.5, 1 and 2 μg of antibody per ChIP experiment was analyzed. IgG (1 μg/IP) was used as a negative IP control. Quantitative PCR was performed with primers for the promoters of the active GAPDH and EIF4A2 genes, used as positive controls, and for the coding regions of the inactive MB and MYT1 genes, used as negative controls. Figure 1 shows the recovery, expressed as a % of input (the relative amount of immunoprecipitated DNA compared to input DNA after qPCR analysis)

    A.

    B.

    C.

    Figure 2. ChIP-seq results obtained with the Diagenode antibody directed against H3K27ac

    ChIP was performed on sheared chromatin from 100,000 K562 cells using 1 μg of the Diagenode antibody against H3K27ac (Cat. No. C15410196) as described above. The IP’d DNA was subsequently analysed on an Illumina Genome Analyzer. Library preparation, cluster generation and sequencing were performed according to the manufacturer’s instructions. The 36 bp tags were aligned to the human genome using the ELAND algorithm. Figure 2A shows the peak distribution along the complete human X-chromosome. Figure 2 B and C show the peak distribution in two regions surrounding the EIF4A2 and GAPDH positive control genes, respectively. The position of the PCR amplicon, used for validating the ChIP assay is indicated with an arrow.

    Figure 3. Cut&Tag results obtained with the Diagenode antibody directed against H3K27ac

    CUT&TAG (Kaya-Okur, H.S., Nat Commun 10, 1930, 2019) was performed on 50,000 K562 cells using 1 μg of the Diagenode antibody against H3K27ac (cat. No. C15410196) and the Diagenode pA-Tn5 transposase (C01070001). The libraries were subsequently analysed on an Illumina NextSeq 500 sequencer (2x75 paired-end reads) according to the manufacturer's instructions. The tags were aligned to the human genome (hg19) using the BWA algorithm. Figure 3 shows the peak distribution in 2 genomic regions surrounding the EIF2S3 gene on the X-chromosome and the CCT5 gene on chromosome 5 (figure 3A and B, respectively).

    Figure 4. Determination of the antibody titer

    To determine the titer of the antibody, an ELISA was performed using a serial dilution of the Diagenode antibody against H3K27ac (Cat. No. C15410196). The antigen used was a peptide containing the histone modification of interest. By plotting the absorbance against the antibody dilution (Figure 4), the titer of the antibody was estimated to be 1:8,300.

    Figure 5. Cross reactivity tests using the Diagenode antibody directed against H3K27ac
    To test the cross reactivity of the Diagenode antibody against H3K27ac (Cat. No. C15410196), a Dot Blot analysis was performed with peptides containing other histone modifications and the unmodified H3K27. One hundred to 0.2 pmol of the respective peptides were spotted on a membrane. The antibody was used at a dilution of 1:20,000. Figure 5 shows a high specificity of the antibody for the modification of interest.

    Figure 6. Western blot analysis using the Diagenode antibody directed against H3K27ac
    Western blot was performed on whole cell (25 μg, lane 1) and histone extracts (15 μg, lane 2) from HeLa cells, and on 1 μg of recombinant histone H2A, H2B, H3 and H4 (lane 3, 4, 5 and 6, respectively) using the Diagenode antibody against H3K27ac (Cat. No. C1541196). The antibody was diluted 1:1,000 in TBS-Tween containing 5% skimmed milk. The marker (in kDa) is shown on the left.

    Figure 7. Immunofluorescence using the Diagenode antibody directed against H3K27ac

    HeLa cells were stained with the Diagenode antibody against H3K27ac (Cat. No. C15410196) and with DAPI. Cells were fixed with 4% formaldehyde for 10’ and blocked with PBS/ TX-100 containing 5% normal goat serum and 1% BSA. The cells were immunofluorescently labeled with the H3K27ac antibody (top) diluted 1:500 in blocking solution followed by an anti-rabbit antibody conjugated to Alexa488. The middle panel shows staining of the nuclei with DAPI. A merge of the two stainings is shown at the bottom.